DEMOPUR 710 polyurethane
Description
DEMOPUR 710 is a liquid polyurethane adhesive for the primary application on a skin leather vamp or for highly absorbent materials.
1. Shake and mix glue well.
2. Apply glue to pre-treated surfaces.
3. Leave to dry for about 20 to 25 minutes.
This adhesive can only be diluted with DILUENTE 405.
4. Apply a second coat of DEMOPUR 777 or DEMOPUR 888 polyurethane adhesive.
Leave to dry for about 20 - 25 minutes and reactivate at a temperature of about 60-70 ° C.
5. Compress evenly hot parts to be glued evenly over the time necessary for partial hardening of the adhesive.
Finally bonding stabilizes after 18-24 hours.
DEMOPUR 710 should be stored in a dry and ventilated place in a tightly closed original packaging at a temperature of 10 to 30 ° C.
Cans of 4.50 kg net
Cans of 15.00 kg net
- PROPERTY - solvent modified polyurethane adhesive
- SOLVENTS - esters and ketones
- DIFFICULTY (MPa) (Brook.RVT,) - 500 +/- 150
- DRY RESIDUE% - 13.3 +/- 1.5%
- APPEARANCE - low viscosity pearl white
- SPECIFIC DENSITY - 0.890 kg / lt.
1. Shake and mix glue well.
2. Apply glue to pre-treated surfaces.
3. Leave to dry for about 20 to 25 minutes.
This adhesive can only be diluted with DILUENTE 405.
4. Apply a second coat of DEMOPUR 777 or DEMOPUR 888 polyurethane adhesive.
Leave to dry for about 20 - 25 minutes and reactivate at a temperature of about 60-70 ° C.
5. Compress evenly hot parts to be glued evenly over the time necessary for partial hardening of the adhesive.
Finally bonding stabilizes after 18-24 hours.
DEMOPUR 710 should be stored in a dry and ventilated place in a tightly closed original packaging at a temperature of 10 to 30 ° C.
Cans of 4.50 kg net
Cans of 15.00 kg net