KEMI 72 1450 Z0V
Description
kemi 72 1450 Z0V - is a cleaner that eliminates residues of the release agent and / or polyurethane present on the mold. Consists of a mixture of non-combustible solvents.
There are no contraindications for metal forms, while for resin materials it is recommended to conduct a small resistance test in advance, as the product may affect the material.
Appearance - colorless liquid
Flammability - non-combustible product
Apply to a mold that is not too hot to avoid rapid evaporation of the solvent, and wipe the mold with a bristle brush until the deposits soften. Remove the residue with a clean rag and repeat the operation.
Before resuming the molding cycle, we suggest washing the mold with solvent, then thoroughly drying it with a clean cloth or using air.
If you do not want to use a solvent, you can substitute one or two layers of release agent to completely remove KEMI 72 1450 Z0V residues.
It is advisable to comply with safety regulations regarding the use of solvents (gloves, glasses, protective clothing, etc.).
Based on our experience, there were no compatibility problems with polymer molds, but it is recommended that preliminary tests are always carried out in small areas to ensure that there is no problem with aggression on the surface of the mold.
kemi 72 1450 Z0V should be stored in a dry and well-ventilated place in a tightly closed original packaging at a temperature of 4 ° C.
Cans of 25 kg
There are no contraindications for metal forms, while for resin materials it is recommended to conduct a small resistance test in advance, as the product may affect the material.
Appearance - colorless liquid
Flammability - non-combustible product
Apply to a mold that is not too hot to avoid rapid evaporation of the solvent, and wipe the mold with a bristle brush until the deposits soften. Remove the residue with a clean rag and repeat the operation.
Before resuming the molding cycle, we suggest washing the mold with solvent, then thoroughly drying it with a clean cloth or using air.
If you do not want to use a solvent, you can substitute one or two layers of release agent to completely remove KEMI 72 1450 Z0V residues.
It is advisable to comply with safety regulations regarding the use of solvents (gloves, glasses, protective clothing, etc.).
Based on our experience, there were no compatibility problems with polymer molds, but it is recommended that preliminary tests are always carried out in small areas to ensure that there is no problem with aggression on the surface of the mold.
kemi 72 1450 Z0V should be stored in a dry and well-ventilated place in a tightly closed original packaging at a temperature of 4 ° C.
Cans of 25 kg