PUNTEX TA
Description
ARTICLE/THICKNESS
PUNTEX TA 1 0.80 ± 0.05 mm
PUNTEX TA 2 0.90 ± 0.05 mm
PUNTEX TA 3 1.10 ± 0.05 mm
PUNTEX TA 4 1.25 ± 0.05 mm
PUNTEX TA 5 1.45 ± 0.05 mm
SPECIFICATIONS
The standard version is available with hotmelt coating.
PUNTEX TA materials have good mold resistance and good data for hot forming. It is recommended for numerous types of shoes, both for men (classic, casual, sports, special), and for women.
INSTRUCTIONS FOR USE
The material can be cut in any direction, it must be glued using a hot pressing machine.
It should be molded at a temperature of 150-160° C, under a pressure of +/- 5 bar for 5-7 seconds. (depending on the thickness).
Time can be shortened if the equipment is equipped with a heating pad.
Sheet size - 1 m x 1.5 m (sheets on a pallet).
PUNTEX TA 1 0.80 ± 0.05 mm
PUNTEX TA 2 0.90 ± 0.05 mm
PUNTEX TA 3 1.10 ± 0.05 mm
PUNTEX TA 4 1.25 ± 0.05 mm
PUNTEX TA 5 1.45 ± 0.05 mm
SPECIFICATIONS
- SHEET: 100X150 cm
- ADHESIVE: one sided
The standard version is available with hotmelt coating.
PUNTEX TA materials have good mold resistance and good data for hot forming. It is recommended for numerous types of shoes, both for men (classic, casual, sports, special), and for women.
INSTRUCTIONS FOR USE
The material can be cut in any direction, it must be glued using a hot pressing machine.
It should be molded at a temperature of 150-160° C, under a pressure of +/- 5 bar for 5-7 seconds. (depending on the thickness).
Time can be shortened if the equipment is equipped with a heating pad.
Sheet size - 1 m x 1.5 m (sheets on a pallet).