PUNTAL TAS
Description
MATERIAL FOR RIGID THERMOPLASTIC TRAYS
ARTICLE/THICKNESS
PUNTAL TAS 10 1.10 ± 0.05 mm
PUNTAL TAS 12 1.20 ± 0.05 mm
PUNTAL TAS 14 1.45 ± 0.05 mm
PUNTAL TAS 16 1.55 ± 0.05 mm
PUNTAL TAS 18 1.70 ± 0.05 mm
PUNTAL TAS 20 1.95 ± 0.05 mm
SPECIFICATIONS
INSTRUCTIONS FOR USE
The subsock is attached using a pneumatic control press, equipped with a heated plate, a timer and a temperature regulator. (Reactivation of the vamp and toe cap is required before mounting).
Toe has to be applied with the right pneumatic pressing machine equipped with heating plate, thermostat (hot reactivation of the lining and the toe is required before lasting).
ARTICLE/THICKNESS
PUNTAL TAS 10 1.10 ± 0.05 mm
PUNTAL TAS 12 1.20 ± 0.05 mm
PUNTAL TAS 14 1.45 ± 0.05 mm
PUNTAL TAS 16 1.55 ± 0.05 mm
PUNTAL TAS 18 1.70 ± 0.05 mm
PUNTAL TAS 20 1.95 ± 0.05 mm
SPECIFICATIONS
- APPLICATION: high stiffness
- SHEET SIZE: 100X150 cm
- SUPPORT: nonwoven support
- ADHESIVE: single side Hot-Melt adhesive
- PACKING: sheets on pallet
- TEMPERATURE: 150 – 160° C
- ADHESIVE TIME: 5 - 7 sec. Depends on Thickness
- PRESSURE: +/- 5 bar
INSTRUCTIONS FOR USE
The subsock is attached using a pneumatic control press, equipped with a heated plate, a timer and a temperature regulator. (Reactivation of the vamp and toe cap is required before mounting).
Toe has to be applied with the right pneumatic pressing machine equipped with heating plate, thermostat (hot reactivation of the lining and the toe is required before lasting).